BVV-105: E-mail-SMS-Gateway
BVV-105 Is a small, DIN-rail mountable device, which works as a local SMTP-server i.e. e-mail server. This means, that it can receive e-mail messages locally, and relay them as text messages (SMS) through serially connected GSM-modem.
In typical usage, BVV-105 receives email message (usually alarm message) from building automation controller , converts message to SMS message, and sends it to receiver.
Receiver messages can also be relayed to smtp-server, to be delivered as emails.
Configuration and commissioning is performed through web-based user interface.
NOTE! For sending SMS messages to GSM network, BVV-105 needs working GMS-modem like Cinterion BGS2T attached to it. 
Modem status LED
The orange status LED of BGS2T can help with troubleshooting: Usually the SIM card (or cellular service subscription) is at fault if the LED is blinking in the Limited Network Service mode (600 ms on/600 ms off). In this case a more specific error code can be read from the SMS Daemon log (a reboot of BVV-105 may be required to show the log at the beginning).
Normally the LED should blink in the IDLE mode (75 ms on/3 s off).
Downloads:
BVV-105 commissioning 2023-02-15.pdf
BVV105-ip-palautus-ohje-2019-11-22.pdf
Technical data |
|
| Electrical |
|
|
Supply voltage |
5 V DC |
|
Supply current |
< 500 mA |
| Connectors |
|
| Ethernet |
1 x 10/100 Mbps |
| USB |
1 |
| MicroSD |
1 (max. 32GB card) |
| Integration |
|
| SMTP server |
|
| Modbus TCP/RTU |
|
| Bacnet/IP |
|
| Mounting |
|
| IP rating |
IP20 |
| Enclosure material |
PC / ABS plastic |
| Op. temperature |
-40 .. 85 °C (< 95% RH) |
| Dimesions |
72 x 91 x 63mm (W x H x D) |
| Weight |
130 g |